Philips Respironics System One 60 Series Heated Tube Humidifier with Heated Tube

Product Code: IN6T
Availability: In Stock
Qty:
    - OR -   Add to Wish List
Add to Compare

The PR System One 60 Series Heated Tube Humidifier with Heated Tube optimizes air stream humidification and reduces rainout while guarding against machine water damage. The humidifier considers room air temperature along with the airflow of the machine to adjust the humidification level. The Heated Tube adjusts in concert with the humidifier to maximum comfort, which helps to increase the success of the therapy.

This humidifier offers three levels of humidification (70, 80 or 90 percent) and the heated tube has five levels of temperature available, ranging from 4 to 16 degrees above the room temperature. These two features work together to deliver the optimum humidification level at the mask.

PR's Dry Box Technology is designed to trap water in the humidifier where it belongs, keeping it away from the machine. The one way valve on the air outlet port further guards against water exiting the humidifier.

The PR System One 60 Series Heated Tube Humidifier is compatible only with the following 60 Series Machines made by Philips Respironics:

 

Please Note: System One 60 Series Heated Tube Humidifier with Heated Tube is compatible only with PR System One REMStar 60 Series Machines. It is not compatible with other machines manufactured by Philips Respironics (including System One REMStar Machines) or any other manufacturers. Although the 60 Series Heated Tube Humidifier with Heated Tube can is compatible with the 60 Series SE machine, the humidity level is not adjustable and is set by default to 2 on System One Relative Humidity which will deliver 80% humidity.

 

Product Specifications

PR System One 60 Series Heated Tube Humidifier

Material Components of Metal Plates on Humidifier and Inside Chamber: Anondized Aluminum

Temperature Operating: 41° F to 95° F (5° C to 35° C)

Temperature Storage: -4° F to 140° F (-20° C to 60° C)

Relative Humidity: 15 to 95% (non-condensing)

Atmospheric Pressure: 77 to 101 kPa (0 - 7500 ft.)

Dimensions: 7 in. L x 5.5 in. W x 4.0 in. H (18 x 14 x 10 cm)

Weight (with water tank empty): Approximately 1.95 lbs (<.89kg)

Water Capacity: 325 mL (1 1/3 cups /11 oz) at recommended water level

Standards Compliance: This humidifier is designed to conform to the following standards: IEC 60601-1 General Requirements for Safety of Medical Electrical Equipment EN ISO 8185 General Requirements for Humidification Systems

AC Power Consumption: (with 60 W power supply): 100 - 240 VAC, 50/60 Hz, 2.1 A max.

AC Power Consumption: (with 80 W power supply) 100 - 240 VAC, 50/60 Hz, 2.0 A max.

DC Power Consumption: 12 VDC, 6.67 A

Type of Protection Against Electric Shock: Class II Equipment

Degree of Protection Against Electric Shock: Type BF Applied Part

Equipment Type: IPX1: Drip Proof Equipment

Mode of Operation: Continuous

Electromagnetic Compatibility: The device meets the requirements of EN 60601-1-2, 2nd edition.

HeaterPlate: 75º C (167º F)

System One Relative Humidity:

  • Setting 1 = 70%
  • Setting 2 = 80%
  • Setting 3 = 90%
Pressure Drop with Humidifier: (max.) 0.3cm H2O at 60 LPM flow

 

Humidity min Output: 10 mg H2O/L, measured at max flow, 35º C, 15% RH

Disposal: When necessary, dispose of the humidifier in accordance with local regulations.

Heated Tubing Specifications

Maximum Recommended Pressure: 25 cm H20

Inner Diameter: 15 mm (0.6 in.)

Length: 1.83 m (6 ft)

Heated Tubing Temperature Range: 16º to 32º C (60º to 89º)

Heated Tubing Temperature Cut-out: ? 41º C (? 106º F)

Material: Flexible plastic and electrical components

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By MaaniTech . Super Medicare © 2021.
paymethods